On this page
Your needs, this model
Does it fit your priorities?
Does the WiFi HDi90 meet 80 pints AHAM but not 100, while offering app humidity control?
Its exact page rates it at 90 pints AHAM and documents app control; saturation is not substituted for a 100-pint rating.
Explore this need in the finder →Does the WiFi HDi90 support an unmeasured pump route but not a required one-foot rise?
A pump is documented; no exact numerical pump-rise limit is stated.
Explore this need in the finder →Does the exact app feature prove remote start/stop of the condensate pump?
No. App humidity control is shown, but the manual does not document activating the pump from the app.
Explore this need in the finder →The AlorAir Sentinel HDi90 WiFi combines the 90-pint-per-day HDi90 platform’s built-in condensate pump with documented app-based monitoring and adjustment. It is the strongest fit in this family when remote humidity checks are essential; it does not remove the need to plan a pump route or verify app compatibility.
The assessment uses AlorAir’s exact HDi90 WiFi listing and its linked HDi90 WiFi user manual. The manual cover names Sentinel HDi90; the exact listing supplies the WiFi variant identity.
Remote monitoring is the reason to choose it
AlorAir describes app-based control on the exact page, including remote humidity monitoring and adjustment. The manual describes pairing through the unit’s up/down-key combination and a Wi-Fi status indicator, so the capability is more than a generic smart-product label. That can be useful for a vacation property, a crawl space reached only through a hatch, or a basement where owners want to see humidity without visiting the appliance. However, the listing body refers to AlorAir-R Lite in an app compatibility note while the manual points to a New AlorAir-C Wi-Fi guide. The model’s Wi-Fi capability is supported; the current app name and phone-compatibility path are not consistent across those exact materials. Check current app availability and device support before purchase, and do not mistake remote humidity control for a building alarm, leak detector or guaranteed connection through a weak crawl-space signal.
Capacity and drainage still set the boundaries
The exact manufacturer page lists 90 pints per day at AHAM conditions and 198 at saturation; a separate 47.71-pint DOE figure appears in the related HDi90 specification material. Use the AHAM figure for an ordinary 90-pint threshold and keep the test conditions separate. AlorAir markets coverage up to 2,600 square feet, but that does not replace an assessment of soil moisture, air leakage, water intrusion and temperature. The Wi-Fi version is listed with pump drainage and an included hose. Its installation guide covers the pump and water-level warning, but no maximum vertical pump lift or total hose length is established in the reviewed sources. If the planned discharge must rise a measured distance, that numeric requirement does not pass on the available documentation.
Wi-Fi does not alter the physical water route. You still need a suitable discharge point, secure hose connection and access for cleaning. The manual has a pump-maintenance section and recommends regular cleaning of the pump system; the product page lists a MERV-1 filter. Plan for a grounded circuit, level support, clear air inlets and a serviceable pump panel rather than mounting the unit where maintenance is impossible.
Routine specs and limits
The page lists 115 volts/60 Hz, 5.56 amps, 210 CFM, 2.69 L/kWh COP, a 33.8–104°F operating range, 90 pints at AHAM conditions, 70.5-pound weight and a 23.2 × 15.2 × 17.7-inch cabinet. It describes automatic defrost and a 36–90% humidity range. The exact page lists R32; no separate exact WiFi spec sheet was linked during this review. The product is heavy enough to measure access openings before delivery. For maintenance, keep the filter and evaporator air path clear and have the pump cleaned on schedule. The manual recommends a wired optional remote in the family, but the Wi-Fi version’s app feature should be distinguished from that separate accessory.
Compare the four 90-pint configurations by installation
The standard HD90 is gravity-drain only and has no documented lift pump. The HDi90 Built-in Pump adds a pump but does not establish a numeric rise limit. The HDi90 Duct-able page identifies a dedicated outlet-duct version and pump configuration; it documents duct hardware separately from what is in the box. The Wi-Fi model adds phone monitoring and adjustment, not a different published capacity. If app control is essential, this is the one of the four exact listings that passes that need. If the only important requirement is pump drainage, compare its additional app step and app-compatibility uncertainty with the simpler HDi90 pump page. If the required pump rise is known, wait for a model-specific answer from AlorAir before selecting either pump model. A smaller humidity load, bucket preference or easy room-to-room mobility points toward a conventional household dehumidifier instead.
Key details at a glance
| Published daily removal rating | 90 pt/day |
|---|---|
| Built-in lift pump | Yes |
| Wi-Fi enabled | Yes |
| Bucketless operating mode | No |
| Published product weight | 70.5 lb |
| Advanced filter included | No |
More specifications and setup details
| Capacity rating test conditions | 90 PPD at AHAM conditions (80°F/60% RH); the product page separately advertises 198 PPD at saturation. |
|---|---|
| Manufacturer marketed area claim | 2600 sq ft |
| Documented HVAC duct integration | Yes |
| Filter type/choice listed | MERV-1 |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
Check the route before the room-size claim.
Match the rated capacity and drainage setup to a real place for the water to go.
