hOmeLabs 32-pint Wi-Fi dehumidifier review

HME010089N is hOmeLabs’ 32-pint Wi-Fi dehumidifier, positioned above the 25-pint HME010088N. The maker rates it at 32 pints per day at 80°F/60% RH and separately advertises an 80-pint maximum at 95°F/90% RH. Its actual advantage is the larger published capacity class and a stronger ENERGY STAR efficiency figure—not the 4,500-square-foot headline or an undocumented pump.

The exact hOmeLabs HME010089N page lists its rating conditions, Wi-Fi, room-area claim, one-gallon tank, washable filter, casters and continuous-drain tube. The hOmeLabs 25/32-pint use-and-care manual covers model HME0089 along with HME0088. EPA’s ENERGY STAR record for HME0089 provides the current efficiency and certification details; both the store SKU and the manual/EPA model code are kept explicit.

This page-linked image shows the white dehumidifier beside package art marked 32 Pint. The appliance’s tank window and casters are visible, but the image does not show its model label. The manufacturer does not identify the image as a photograph or render.

What changes from 25 to 32 pints

For a standard comparison, the exact product page gives HME010089N a 32-pint-per-day rating at 80°F/60% RH. Its separate 80-pint high-condition maximum uses 95°F/90% RH and should not be treated as its ordinary output. The EPA’s current listing for HME0089 reports 32.46 pints per day under its test and an integrated energy factor of 2.01 liters per kilowatt-hour. That is a stronger published efficiency figure than the 25-pint HME010088N’s 1.75 IEF; it is still a standardized rating, not a prediction of what one house will spend or collect.

hOmeLabs markets this model for spaces up to 4,500 square feet, versus 3,500 for the 25-pint sibling. Area claims do not resolve how many rooms are connected, whether doors stay open or how much moisture enters the space. If both products could serve a compact, mildly damp room, the larger unit may not be necessary. If the space has a sustained moisture load, the higher rating gives more margin on paper. Do not treat either headline as an independently tested coverage boundary.

The same water route sets the practical limit

The exact HME010089N product page and HME0089 instructions do not document a pump-lift plan. The instructions describe a removable bucket, full-bucket shutoff and continuous drain connection. The exact page lists a one-gallon tank. When emptying a bucket is inconvenient, the maker includes a one-meter drain tube; the model-listed manual gives its inside and outside diameters and shows the rear connection. The appliance needs to remain level and the hose must be installed correctly. Since no maximum gravity-hose length is published, the included one-meter tube is a known supplied length, not proof that a longer run will work.

The manual says the bucket must be installed for the appliance to operate. It does not document a bucketless arrangement, so a continuous-drain hose should not be read as permission to remove the tank. It also gives no exact pump lift or pump hose limit. A pump-required room, an outlet above the dehumidifier or a strict measured hose route needs a model whose own instructions establish that arrangement. HME010089N is a better fit when a bucket or a downhill outlet can work.

App features are similar to the smaller sibling

HME010089N is Wi-Fi enabled and hOmeLabs describes control through a phone app, Alexa and Google Assistant. The pairing guide for model HME0089 uses a 2.4-GHz Wi-Fi network. The local control panel has humidity and timer adjustments, three fan-speed indicators and a continuous mode. These features support day-to-day setting changes, but they do not extend the drainage route or guarantee the moisture level in separated rooms. The exact materials do not give an independently measured noise rating, and the maker’s “quiet” language is not a decibel test.

The manual’s use range is 41°F to 90°F and it includes automatic defrost, a washable filter and a filter reminder after 250 operating hours. Monthly cleaning is recommended. The instruction guide says to let the unit stand upright for 24 hours before first operation; after transport on its side, stand it upright and wait six hours. Keep the air openings clear, use a level floor and close the room’s outside openings while it runs.

Read the efficiency claim precisely

ENERGY STAR’s current HME0089 profile confirms certification and reports an IEF of 2.01. It marks “ENERGY STAR Most Efficient” as No, although the product-page copy uses the phrase “Most Efficient 2024.” The certified status is useful and the IEF is stronger than the sibling’s current profile, but the Most Efficient phrase is not supported by the EPA entry as checked. The shared family manual identifies HME0089; the product page uses retail SKU HME010089N, so keep both strings handy when looking for instructions or parts.

Choose the 32-pint version over HME010088N when the additional published capacity and higher IEF are relevant to your room; choose the smaller model if its 25-pint class is enough and a lower capacity is a better match. Both have the same core bucket/gravity arrangement, app family and unresolved route-length limit. Do not pay for the larger area headline if your true need is a pump, a verified bucketless configuration, an exact cabinet fit or a measured noise ceiling. No independent extraction or room-area test was performed here, and a portable unit is not a repair for active water intrusion.