Midea 22-pint Smart Access Cube Dehumidifier review

The Midea MAD22S1CWWT is a 22-pint Smart Access Cube with a side-entry bucket, app controls and no built-in pump. Its exact page contains a pump-themed title and description that conflict with the model’s own specification table. The table says “Built-in Pump: No,” and the manual marks its pump instructions “only for pump model.” Treat it as a bucket or lower-outlet gravity machine—not as a way to push water uphill.

I matched this assessment to Midea’s exact MAD22S1CWWT U.S. product page, the Midea manual listing MAD22S1CWWT on its cover, and the ENERGY STAR certification record for the same model. Confirm the full suffix if shopping; other Cube and Smart Access versions differ.

The exact Midea page links the white, wheeled Cube exterior shown here. The image does not show a pump or identify the precise internal configuration; Midea does not state whether it is a photograph or a rendering.

What the 22-pint rating and area claim do—and do not—say

Midea publishes 22 pints per day and a headline area of up to 1,500 square feet. The area figure is not a promise that every room of that size will be kept dry: outdoor moisture, leaks, temperature, ventilation and other sources of water change the workload. In ENERGY STAR’s Appendix X1 data, this exact model’s test-method capacity is 22.27 pints per day, with an integrated energy factor of 1.70 L/kWh and listed annual energy use of 276 kWh. Those figures are useful for comparing certified models under their program method; they are not a measured forecast for a particular basement or bedroom. The rounded product-page class and the program’s 22.27 figure are different labels for the model, not competing room guarantees.

The specification table lists dimensions of 15.94 inches wide, 16.97 inches deep and 8.86 inches high, and a dry product weight of 30.86 pounds. That short Cube form with casters is easier to reposition across a suitable flat floor than a taller cabinet, but 30.86 pounds excludes collected water. Its side-access tank and splash guard still need to be removed, carried and emptied when full. Do not treat the area headline as a substitute for considering the room’s moisture load or whether a smaller rated unit can keep up.

Pick a drainage plan that preserves the tank

There are two documented everyday routes: let the fitted bucket collect water, or attach a separate hose and slope it to a lower drain. For continuous gravity drainage, Midea’s manual specifies a 5/16-inch inside-diameter hose with a female threaded end and says that hose is not included. Keep the hose lower than the outlet, avoid kinks, and reinstall the drain plug if you stop using the hose. The bucket must be properly fitted for operation; the manual says the unit stops if it is removed or not seated correctly.

This suffix is not the answer for a raised sink or window drain. The exact page’s specifications expressly say no built-in pump. The family manual discusses pump drainage only for pump-equipped models, and its five-metre pump instruction is expressly conditional on having that model. Neither statement adds a pump to MAD22S1CWWT. If the outlet is higher than the unit, compare a separately documented pump configuration such as Midea’s MAD50PS1BQGR or an appropriate Smart Access model, then check that model’s own installation requirements. Do not combine a gravity plan with an unsupported pump lift.

App control is documented; one EPA field needs careful reading

Midea’s page lists Smart Control, and the model-listed manual includes SmartHome app setup and wireless-module instructions. That supports an app-capable match when you need to adjust a unit remotely, though no manual can guarantee that a future phone, router, app version or cloud service will stay compatible. The ENERGY STAR data row separately contains “Connected Capable: No.” The dataset does not define that field in the individual row; I do not reinterpret it as an assertion that the app instructions are false. Keep app control and that program field distinct, and verify current network support if connected operation is essential.

The manual documents Set, Continuous, Dryer and Comfort modes, two fan speeds, a 24-hour timer and a target range of 35–85% RH in five-point steps. Dryer mode directs air at clothes; the manual cautions that thick or heavy items may not dry as effectively. Comfort mode changes its target with room temperature. These controls broaden how you can use the machine, but neither the named modes nor the app measures or fixes the source of a leak.

Setup and maintenance are part of the fit

Midea specifies operation from 41°F to 90°F. A colder location is outside the stated working range, so choose an appliance documented for the conditions rather than relying on its area headline. The manual lights a filter reminder after 250 hours of fan operation; clean the filter and reset the reminder as described, and empty the bucket when its indicator calls for it. It also gives a three-minute protection delay before restarting after shutdown. Leave room to reach the side tank and route a gravity hose without a trip hazard. The exact product page and manual each state a one-year warranty term; read the warranty delivered with the purchased unit for the controlling details.

Who should choose this suffix?

MAD22S1CWWT is most plausible for someone comparing a compact, app-enabled Cube around the 22-pint/day class who can empty its tank or send water downhill. It is a mismatch if you require pump lift, tank-free operation, a published bucket volume or a larger minimum capacity. The black MAD50PS1BQGR adds a built-in pump and a manual-stated 14-foot rise, while the white MAD22S1AWWT is another 22-pint Smart Access option with a similar non-pump gravity limitation. Compare their exact routes and dimensions, not just the shared Midea name. As with any portable dehumidifier, address persistent water intrusion at its source; this appliance is not a repair for a building leak.