Midea EasyDry 35-Pint Dehumidifier review

Midea’s MAD35C1AWS is the white EasyDry cabinet with a published 35-pint-per-day rating. It steps above the 22-pint MAD22C1AWS, but adds a notably taller and heavier body while retaining the same basic water choices: the fitted tank or a downhill hose. Midea’s US listing says no built-in pump and no Smart Control, so this is not the model to choose for app operation, bucketless running, or drainage to a higher sink.

Sources: Midea’s exact MAD35C1AWS US product page, its model support page, and the current C1AWS family manual linked from the MAD22C1AWS support page. That manual’s cover names MAD35C1AWS. The MAD35 support page currently links a differently titled legacy manual, so I checked the family membership rather than treating that link as evidence for this SKU.

The product image is Midea’s exact-model MAD35C1AWS dimension graphic, a manufacturer illustration rather than a stock photograph. The front product rendering on the 22- and 35-pint US pages is byte-identical; the model-specific dimensions graphic is the clearer way to distinguish their sizes.

What changes at 35 pints per day?

The rated removal rises from 22 pints/day on MAD22C1AWS to 35 on this model. Midea’s 35-pint page headline advertises spaces up to 3,500 square feet, but its full-spec table says 3,000 square feet. That is an internal listing mismatch, not a meaningful performance test. I would ignore both room-area headlines when deciding whether a basement or laundry room needs this unit: the actual moisture load, temperature, air exchange and target humidity matter, and pints per day is a rating rather than a guaranteed output in a particular house.

The US specification table lists 15.43 inches wide, 11.1 deep, 24.25 high and 40.57 pounds. Midea’s model-specific dimensions illustration rounds that to 15.5 by 11.1 by 24.3 inches. Against MAD22C1AWS, this is roughly 4.6 inches taller, a little wider and nearly 8.2 pounds heavier. Check shelf, door and clearance heights before ordering. The four wheels help reposition the unit on an appropriate level floor; they do not make a full tank light to carry. The page describes a large tank but does not provide its volume, so a precise emptying interval cannot be promised.

Plan the water’s destination before purchase

Bucket operation means regularly pulling the tank from the cabinet, emptying it and pushing it back until correctly seated. The manual says the unit must have the tank in place to operate. That is a real constraint if the appliance will run unattended in a damp area or if emptying a tank is difficult.

The family manual also documents continuous gravity drainage. Its instructions call for a 5/16-inch inner-diameter hose and a threaded end; the hose is not included in the generic description, and Midea says the adapter comes with only some models. It does not identify MAD35C1AWS’s exact adapter bundle. Verify fittings separately. The hose must travel to a lower drain with a steady downward path, no kinks and a receiving point below the outlet. Unlike a pump version, this model cannot push water up to a higher receptacle. The manual says the tank must remain properly positioned; it does not document bucketless operation for the C1AWS.

Those limits matter more than the square-foot language. A lower floor drain makes gravity practical; a higher drain rules this model out unless you can add an approved external arrangement. Do not label gravity drainage a pump substitute or assume the 35-pint capacity changes the installation rules.

Controls and care are ordinary, not connected

Midea’s exact US specification says “Smart Control: No” and lists a built-in timer. The 32-page shared manual includes wireless/app instructions for certain family configurations, but it cautions that panel drawings are illustrative and some buttons may be missing. The model-specific page is the safer statement for the MAD35C1AWS: do not count on app or voice control without confirmation from the actual unit’s label and instructions. The manual’s shared settings—such as humidity target adjustment—may describe controls fitted to some family models, not all. No independent test of the display, fan noise or remote-control behavior is claimed.

The manual’s operating range is 41–90°F and 30–80% RH. Provide a level indoor location, at least 8 inches of surrounding space and 16 inches at the air outlet. Keep airflow paths open and leave room to access the bucket and hose connection. Midea advises cleaning the air filter every two weeks and the tank every few weeks. It gives a one-year warranty on the US page. This periodic care continues even with a continuous hose.

Compare the 22-pint and 35-pint alternatives

MAD22C1AWS may be easier to place where height or handling matters: Midea lists it at 32.41 pounds and 19.69 inches high. If that rating fits the need, the smaller case is a concrete advantage; neither EasyDry model has a pump or listed connected controls.

Smart Access MAD35S1AWWT is a distinct 35-pint alternative. Its US page lists SmartHome and voice controls, a 33.73-pound weight, and a shorter 15.94-inch height but greater 18.5-inch width. It still has no pump and its own family manual requires the tank installed. That configuration may fit a low shelf and a connected-control preference, while EasyDry is narrower and has no listed Smart Control. The Cube MAD20S1QWT offers lower 20-pint capacity and documented nesting/bucketless-gravity features; consider it for storage and drain layout, not as a 35-pint substitute.

Choose MAD35C1AWS for its 35-pint rating only when the larger cabinet and tank/gravity routine suit the room. Confirm the electrical outlet, clearances, intended drain and actual model suffix. If an uphill route is essential, choose a separately documented pump model. For leaks or damp construction, repair the source as well as managing indoor humidity.