GE ENERGY STAR 35 Pint Portable Dehumidifier with Smart Dry for Very Damp Spaces review

The GE ADHR35LB raises the ADHR family rating from 22 to 35 pints per day but keeps the compact cabinet and 8.5-pint tank. It is the middle model for a household comparing capacity against footprint: the 35-pint rating is higher, while the daily emptying limit and gravity-only drain route remain familiar. GE says this exact model is no longer manufactured; the assessment is useful for identification and earlier-model comparison, not a claim that it is a current recommendation.

This review draws on the exact ADHR35LB product page, the GE support entry and the shared ADHR family manual 49-5000627 Rev. 0.

More rated capacity without a taller body

The ADHR35LB is listed at 35 pints per day, 36.5 pounds net and 19.5 × 13.25 × 10 inches. Its 8.5-pint bucket matches the ADHR22LB’s tank, and both models share the same listed height and depth. The 35-pint unit publishes 141/105 CFM high/low airflow and an IEF of 1.8 L/kWh, compared with 124/100 CFM and 1.57 for the 22-pint sibling. Those are distinct manufacturer ratings, not a guarantee that the ADHR35LB will remove 35 pints from every room each day or use less electricity in a particular house.

The tank is the practical caution. An 8.5-pint reservoir is only a fraction of the daily rating, and a full bucket shuts the machine off. If the appliance is in a damp space that will fill the tank quickly, consider whether someone can empty it or whether a drain is available. The drain hose is not included; the manual says to attach a separate garden hose, lead it downhill to the floor drain and reinstall the bucket securely. There is no documented pump-lift or bucketless plan for this exact suffix.

What changes from ADHR22LB

Choose the 35-pint configuration in an earlier-model comparison when the higher published capacity is more important than the lowest rating in the family. It weighs 3.3 pounds more than the ADHR22LB and lists a slightly narrower width, but it retains the short 19.5-inch cabinet and same tank. The product image and body are close enough that a shopper should read the model label, not infer capacity from appearance. The next model, ADHR50LB, moves to a taller 50-pint cabinet and a 15-pint bucket, but still uses a lower gravity drain rather than a pump. ADHR35LB sits between those choices rather than adding an alternate water route.

Routine controls and placement

GE lists Energy Star qualification, three fan speeds, Smart Dry, a washable permanent mesh filter and a 24-hour on/off timer. The manual allows a 35%–80% RH target in five-point steps or Nonstop mode, describes Smart Dry as automatic fan adjustment, and states ±5% display accuracy. Auto restart after an outage, automatic defrost and the full-bucket alarm are operating conveniences, not substitutes for maintenance. The rear filter should be washed at least every 250 operating hours and dried before it goes back; the bucket needs regular cleaning as well.

For this 35-pint model the manual specifies indoor residential use, an operating range above 41°F and up to 90°F, and 18 inches of air space on every side. The four casters require first-use installation, followed by a one-hour upright wait. The nominal 19.5-inch height does not include free space for the top outlet or access to pull the bucket forward. A tight alcove may therefore defeat the compact-body advantage.

Who should compare it?

Keep the ADHR35LB in view if you own one, are checking a particular used or remaining-clearance unit, or need to understand the former GE 35-pint class. It does not meet an uphill drain requirement, a no-bucket requirement or an essential app requirement based on the exact evidence reviewed. Its page says no longer manufactured, while the support record dates manufacture March 2022–February 2025. Do not treat a clearance banner as local stock or proof of warranty. For a current 35-pint comparison, see the Midea MAD35S1AWWT and Frigidaire FHDD3534Y1; compare their exact features rather than transferring ADHR assumptions.