Your needs, this model
Does it fit your priorities?
Would the DH2526K1W's 25-pint class meet a 20-pint minimum if you collect water in the fitted bucket?
Yes for the published class threshold and bucket plan; the exact page calls it 25-pint and describes the internal bucket. A 35-pint minimum is above this model's rating.
Explore this need in the finder →Does one manual fan speed meet your minimum, or do you need two selectable speeds?
The exact Hisense page identifies a single-speed model, so a one-speed minimum is met but a two-speed minimum is not.
Explore this need in the finder →Is an ENERGY STAR listing with a 1.70 L/kWh factor enough, or do you need a higher IEF?
The official DH2526K1W record is certified at 1.70 L/kWh; this satisfies 1.70 but not 1.80.
Explore this need in the finder →Is app control essential, or is an offline bucket model acceptable?
The ENERGY STAR record marks this model not connected-capable. It can fit when app control is not essential, but it fails an app-required need.
Explore this need in the finder →Will the separate hose carry water to an outlet above the unit?
No upward route is established. Hisense mentions a garden-hose connection but publishes no pump lift limit for this configuration, so an essential raised drain should not be matched.
Explore this need in the finder →The Hisense DH2526K1W is a 25-pint-class, single-speed portable dehumidifier with a fitted collection bucket and a separate garden-hose connection listed as an alternative. Its strongest reason to consider it is a fairly specific one: you want this smaller capacity class, are comfortable emptying a bucket, and value a model-specific ENERGY STAR record. The 1,500-square-foot headline is not a room-performance promise, and the manufacturer does not publish a pump lift limit for this configuration.
Hisense’s DH2526K1W product page identifies the exact model and describes the bucket, garden-hose connection, low-temperature operation and two-year parts-and-labor warranty. Its ENERGY STAR record gives the standardized removal, efficiency and annual energy figures for this SKU.
A modest rating, with the energy data to compare it precisely
Hisense calls the DH2526K1W a 25-pint single-speed model. The ENERGY STAR record reports 24.89 pints per day under its standard test procedure, which is consistent with that rounded class label. It also lists an integrated energy factor of 1.70 L/kWh and annual energy consumption of 314 kWh. Those values help distinguish the model on paper; they are not a forecast of your electric bill or the water it will collect in your room. Temperature, moisture entering the space and operating time all affect actual output.
The product page advertises coverage up to 1,500 square feet, but an area figure cannot describe every basement layout or dampness source. Think first about whether a 25-pint rating is the class you want. If your requirement is at least 35 pints per day, this one does not meet that threshold; the Hisense DH3526K1W is the reviewed 35-pint alternative. A listed pint rating should not be read as the amount that will necessarily land in the bucket each day.
Bucket collection is the dependable plan
The exact page describes a slide-out internal bucket with a full-tank alert. That arrangement is easy to understand but makes emptying part of ownership. The warning helps you notice when attention is needed; it does not remove the need for a realistic emptying routine. If the room is unattended for long stretches, think about how often you can visit and empty it before choosing a bucket-centered setup.
Hisense also says a garden hose, sold separately, can connect through the side of the cabinet. The public listing does not give a pump lift or a maximum hose reach. Do not treat the hose connection as evidence that water can be pushed upward to a sink or window. If the outlet is above the appliance, choose a model with an explicit pump description and a published height limit, such as the Hisense DH6024KP1WG, and measure both the vertical rise and total hose path. For this DH2526K1W assessment, the finder only counts the fitted-bucket plan; it does not award a gravity or pump match from the hose sentence alone.
Controls and care are intentionally uncomplicated
This is a single-speed product, so there is no second or third manual fan setting to choose when airflow is too noticeable or when you want to fine-tune the sound. The manufacturer describes a humidistat and a washable, accessible filter, plus an indicator that reminds you to clean the filter. That gives you a clear routine rather than a specialty filtration system. The page does not document app control, and the ENERGY STAR record marks the model as not connected-capable; it is not a fit if remote operation is essential.
The model is listed for operation down to 38°F, a useful published boundary when comparing units for a chilly basement. It is not a promise of the same extraction at that temperature as in warmer air. Hisense describes quiet operation but does not publish a DH2526K1W decibel value in the material reviewed here, so choose another model if a measured sound limit is non-negotiable. The warranty is two years on parts and labor; it is a stated coverage term, not evidence of independent reliability testing.
Who should shortlist it
The DH2526K1W makes the most sense when a 25-pint-class unit meets the need, you want an ENERGY STAR-certified model, and a fitted tank is acceptable. Its page-backed features include the bucket alert, washable filter and 38°F minimum operating point. Its certified record gives a useful basis for comparing energy-factor labels, while the listing keeps the controls simple.
Pass if you need a confirmed uphill pump route, bucketless operation, a particular tank capacity, measured noise, a known dry weight or exact dimensions. Those details are not established for this configuration by the sources above. For more capacity and three speed choices, compare the DH3526K1W; for a documented pump route and a 60-pint class, see the DH6024KP1WG. Their drainage and capacity claims are not interchangeable with the DH2526K1W. No independent room test or personal ownership claim is being made here.
Key details at a glance
| Published daily removal rating | 25 pt/day |
|---|---|
| ENERGY STAR certified | Yes |
| Controls and settings | The exact product page describes one speed, an adjustable humidistat, a washable accessible filter, a filter-cleaning reminder, a full-tank alert and operation down to 38°F. It does not document app control or a model-specific sound level. |
| Water-removal setup | Hisense describes the internal fitted bucket or a separate garden hose connected through the cabinet side. The exact sources reviewed do not state pump presence, pump lift, hose reach, hose slope, or bucketless setup. The matcher therefore uses only bucket collection; a garden-hose mention is not treated as an uphill pump or a confirmed gravity installation. |
| Care and operating limits | The exact product page identifies a washable, accessible filter and a filter reminder. It does not provide an exact filter-cleaning interval in the reviewed material. Check the supplied instructions before using a hose route or setting a maintenance schedule. |
| Exact model detail | Hisense DH2526K1W is the 25-pint, single-speed configuration. Its exact listing describes a fitted collection bucket, low-temperature operation to 38°F, a washable filter and a two-year parts-and-labor warranty. The displayed 1,500-sq-ft value is a headline, not a guaranteed room result. |
| Published integrated energy factor | 1.7 L/kWh |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this assessment
Check the route before the room-size claim.
Match the rated capacity and drainage setup to a real place for the water to go.
