
Midea
Midea Cube 20-Pint Dehumidifier
A 20-pint/day Cube with a nested-storage design, app and voice controls, and bucket or gravity-drain water handling; it has no built-in lift pump.
Read the assessment ↗Compare the real constraint
A bucket, a gravity hose and a pump solve different drainage problems. Then compare the features that change the daily routine: tank size, filter supply, sensors and cabinet fit.
The three reviewed Midea Smart Access models all support tank collection and continuous gravity drainage. MAD22S1AWWT and MAD35S1AWWT have no built-in pump; MAD50PS1AWBL adds one, with a manual-stated maximum distance and rise of 5 metres. Its family manual does not document bucketless running, so keep its side-access tank installed.
The Cube MAD20S1QWT and MAD50S1QWT-A are no-pump models with bucket and gravity options, while the Cube manual separately documents a bucketless gravity setup. The Cube MAD50PS1QWT-A adds a pump with a 14-foot stated vertical limit, and its bucket must stay installed during pump use. Do not mix that specification with the Smart Access limit.
The two reviewed Frigidaire FHDP models add pump options with a 5-metre maximum distance and rise. Their pump cycles begin when the tank reaches the full point; neither manual documents bucketless pump operation. The FHDP5033Y1 has Wi-Fi and ENERGY STAR certification, while FHDP6033W1 has a larger rating and bucket but no Wi-Fi or ENERGY STAR listing. These are distinct from the no-pump FHDD models.
FHDD5033Y1 is the shorter, two-speed model with a 1.9-gallon bucket, washable dust filter, Wi-Fi and ENERGY STAR certification; it has no advanced-filter option. FHDD5034Y1 keeps Wi-Fi and ENERGY STAR, adds a third fan speed and a 2.7-gallon bucket, and accepts a PureAir filter sold separately. Gallery GHDD5035W1 has the same 50-pint rating and 2.7-gallon bucket, includes the advanced filter and adds an air-quality monitor with app readout, but is not ENERGY STAR certified. All three use a fitted bucket or gravity hose to a lower drain; none has a pump or documented bucketless mode. The included filter and air-quality indicator do not establish a health or diagnostic benefit. See the Frigidaire filter-package comparison for the purchase tradeoffs.
FHDD3534Y1 and Gallery GHDD3535W1 are both 35-pint/day, 1.7-gallon, three-speed, Wi-Fi models with no pump. The FHDD weighs 37 lb, is ENERGY STAR certified in the exact U.S. record, and accepts PureAir filtration sold separately; its washable dust filter is still the routine filter. The Gallery weighs 34 lb, includes a non-washable PureAir filter, and adds a PM2.5 air-quality indicator with app reading, but the exact U.S. page/spec says it is not ENERGY STAR certified. A Canadian support-page title uses conflicting Energy Star wording, so this comparison follows the U.S. model evidence rather than transferring a foreign-market label. Each manual allows a bucket or lower gravity hose, not a raised pump outlet or documented bucketless operation; regular filter, bucket and (for Gallery) sensor care remain part of ownership. The indicator is not a medical diagnosis or evidence of a health benefit. See the 35-pint filter-package comparison for a focused choice guide.
FHDD2233Y1 and FHDD2234W1 both list 22 pints/day, ENERGY STAR certification, a washable dust filter and no pump. The FHDD2233Y1 is 17 inches tall with a 0.85-gallon bucket, two fan speeds, no Wi-Fi and no advanced-filter option. FHDD2234W1 is 19.8 inches tall with a 1.7-gallon bucket, three speeds, Wi-Fi and optional separately sold PureAir compatibility. Its filter is not included. The latter lists lower low-speed sound at 43 dBA versus 47.5 dBA, while both list 49 dBA at high speed; those are manufacturer figures, not independent sound tests. Both manuals allow a bucket or lower gravity hose, not pump lift or a documented bucketless setup. Their installation clearances also differ, so compare the exact bodies and outlet orientation rather than assuming the common capacity means a common fit. See the 22-pint controls-and-bucket comparison for a focused choice.
LG’s current catalog lists DT251BKR0 at 25 pints and DT351BKR0 at 35 pints in the same 14.43 × 8.66 × 24.02-inch body; the black DT501BKR0 and white DT501BWR0 are 50-pint finish variants in a larger chassis. The 50-pint EPA record gives 49.81 pints/day and IEF 2.01; those values are not assigned to the 25/35 models, whose certification status is unknown here. All use a fitted bucket or gravity hose to a lower outlet, with the bucket installed. None provides a documented lift pump. Compare the LG family by capacity, drain setup and source-backed limits.
The reviewed Midea models range from 20 to 50 pints/day, and the Frigidaire FHDP models are rated at 50 and 60 pints/day. The three FHDD/GHDD Frigidaire models each list 50 pints/day. Those ratings distinguish capacity classes; they are not guaranteed output for a particular room. Published square-foot copy is not used as a hard fit test. Larger cabinets can also ask for more space and dry weight: a compact 22-pint Smart Access is listed at 30.84 pounds, while the 60-pint Frigidaire FHDP6033W1 is 58 pounds dry.
A pump is useful only if the receiving point is higher and the exact route is within that model’s documented limit. A lower gravity outlet may be simpler; a bucket may be practical when no drain is nearby. Compare the route, rating, cabinet, filter upkeep and moving burden together.
GE’s AHW40LL, AHW50LL and AHW65LM pages publish 42, 51 and 66 pints/day in their technical rows, even though their model labels use 40, 50 and 65. Their manuals document a fitted bucket or gravity hose to a lower floor drain; they do not establish pump lift. AHW40LL has a smaller 10.5-pint bucket, while AHW50LL and AHW65LM list 21 pints. These are discontinued owner references rather than new-purchase suggestions. Read the GE AHW family comparison.
The discontinued AHG20LA is listed at 19 pints/day with a six-pint bucket, one fan-speed selection and fixed humidity bands; its manual describes a separate charcoal filter as well as the washable rear filter. The AHG25LA is listed at 25 pints/day with a 24-pint bucket and two fan speeds, but its deeper cabinet and fitted-bucket instructions still require hands-on access. Both models are earlier owner references, not current buying suggestions. Their manuals document bucket and lower-gravity water paths, not an upward pump; AHG25LA explicitly requires its bucket in place, while AHG20LA’s bucketless status is not established. Read the AHG20LA/AHG25LA owner comparison.
The exact discontinued GE APEL45LY lists 45 pints/day, a 15-pint tank, 43.7-pound net weight and 16-foot internal-pump lift. Its manual says the pump waits until the fitted bucket fills, then drains through the included pump hose; this is not bucketless operation. The 50-pint APHL50LB, APHR50LB and APYR50LC share a 16-foot limit but differ in tank, fan controls and certification. APEL45LY also publishes IEF 2.0 L/kWh, but that does not establish ENERGY STAR certification or a real-room energy bill. Compare it with the three GE 50-pint pump references.
The ADHE family’s white cabinet does not identify its exact water or app setup: the ADHE25BWF and ADHE35BWF share an 8.5-pint tank, the 50-pint suffixes use a 15-pint tank, only ADHE50PWF lists a built-in pump (with the bucket seated), and only ADHE50WWF lists Wi-Fi in its exact product specifications. GE’s exact product pages also say these units are no longer manufactured and out of stock online, while the support pages retain a May 2025–Present manufacture-date line. They are earlier references, not current default picks. Compare the ADHE exact suffixes and setup limits.
The ADHR22LB and ADHR35LB share an 8.5-pint tank and short body; ADHR50LB and the connected AWHR50LB are 50-pint models with 15-pint tanks. AWHR50LB is the only one of these exact suffixes whose specification table and manual establish Wi-Fi. None documents a built-in pump or bucketless use: all rely on a fitted tank or a downhill gravity hose. GE says each is no longer manufactured, so keep these references out of default current results. Compare the ADHR/AWHR family details.

Midea
A 20-pint/day Cube with a nested-storage design, app and voice controls, and bucket or gravity-drain water handling; it has no built-in lift pump.
Read the assessment ↗
Midea
A 35-pint/day Cube with app and voice-control support, nested storage, and bucket, gravity-hose, or documented bucketless-gravity operation; it has no built-in lift pump.
Read the assessment ↗
Midea
A white, 35-pint-class Midea Cube with a documented no-pump configuration, bucket or downhill gravity drainage, and nested storage. Exact weight and bucketless setup are not established for this suffix.
Read the assessment ↗
Midea
A white 50-pint/day Cube with SmartHome app and voice-control support, a nested-storage design, and bucket, continuous-gravity, or documented bucketless-gravity drainage; Midea lists no built-in pump.
Read the assessment ↗
Midea
A 50-pint/day Cube with smart controls and bucket or gravity drainage; this suffix-A configuration lists no built-in lift pump.
Read the assessment ↗
Midea
A 50-pint/day Cube whose built-in pump can send condensate upward; bucketless mode and pump mode are separate configurations.
Read the assessment ↗
Midea
A 22-pint/day Smart Access dehumidifier with a side-access tank, SmartHome and voice-control support, and no built-in pump.
Read the assessment ↗
Midea
A 35-pint/day white Smart Access dehumidifier with app and voice-control support, a side-access tank and no built-in pump.
Read the assessment ↗
Midea
A black 50-pint/day Smart Access dehumidifier with app and voice-control support, side-access tank and a built-in pump.
Read the assessment ↗
Midea
A 22-pint/day EasyDry with a wheeled body, tank collection or lower gravity drainage, and an onboard timer; it has no listed lift pump or Smart Control.
Read the assessment ↗
Midea
A 35-pint/day EasyDry in a taller, heavier wheeled cabinet, using its installed tank or a lower gravity drain; the US page lists no pump and no Smart Control.
Read the assessment ↗
Midea
The white MAD50PS1QWT is a 50-pint/day Cube with SmartHome app and voice-control support, nesting storage, and a built-in condensate pump. Its 2024 owner manual separately documents bucket, downhill-gravity, bucketless-gravity and pump modes; pump mode requires the bucket installed.
Read the assessment ↗
Midea
Midea’s exact US page lists this white 50-pint/day Cube with built-in pump, SmartHome/voice support, wheels and nesting storage. The 2024 Cube manual separately documents bucket, gravity, bucketless-gravity and pump modes for the model family; the B model is listed among the pump versions.
Read the assessment ↗
Frigidaire
The FHDP5033Y1 is a 50-pint/day, Wi-Fi-enabled Frigidaire dehumidifier with a built-in pump, a 1.9-gallon bucket and a 5-metre (16.4-foot) manufacturer-stated pump distance-and-rise limit. Its pump starts when the tank reaches the full point; a bucketless pump arrangement is not documented.
Read the assessment ↗
Frigidaire
The FHDP6033W1 is a 60-pint/day Frigidaire dehumidifier with a built-in pump and a 3.2-gallon bucket. Its manual gives a 5-metre (16.4-foot) maximum pump distance and rise. The published specifications list no Wi-Fi and no ENERGY STAR certification.
Read the assessment ↗
Hisense
A 60-pint/day portable dehumidifier with a built-in pump, three manual fan speeds and a supplied quick-connect pump hose; the exact manual limits hose length to 16 ft and the pump discharge height to less than 16 ft.
Read the assessment ↗
Hisense
A 50-pint-class portable dehumidifier with an advertised built-in pump and included quick-connect hose. The exact U.S. product page describes discharge to a sink or basement window, but does not publish pump height, hose reach or detailed installation limits.
Read the assessment ↗
Frigidaire
The FHDD5033Y1 is a 50-pint/day, Wi-Fi-enabled Frigidaire model with a washable dust filter, a 1.9-gallon bucket and gravity-drain option. Its specification sheet says it has no built-in pump and no advanced-filter option.
Read the assessment ↗
Frigidaire
FHDD5034Y1 is Frigidaire’s 50-pint/day Wi-Fi model with ENERGY STAR certification, three fan speeds and a 2.7-gallon bucket. It supports an optional PureAir advanced filter, sold separately, and has no built-in pump.
Read the assessment ↗
Frigidaire Gallery
GHDD5035W1 is a 50-pint/day Gallery model with Wi-Fi, a built-in air-quality monitor, an included PureAir advanced filter, three fan speeds and a 2.7-gallon bucket. Frigidaire’s exact sheet says it is not ENERGY STAR certified and has no built-in pump.
Read the assessment ↗
Frigidaire
FHDD3534Y1 is a 35-pint/day Wi-Fi model with ENERGY STAR certification, three fan speeds, a 1.7-gallon bucket and no pump. It accepts a separately sold PureAir filter.
Read the assessment ↗
Frigidaire Gallery
GHDD3535W1 is a Gallery 35-pint/day Wi-Fi model with an included PureAir filter, app-visible air-quality sensor, three fan speeds and a 1.7-gallon bucket. Its exact U.S. spec says it is not ENERGY STAR certified and has no pump.
Read the assessment ↗
Frigidaire
22-pint/day Frigidaire dehumidifier with a 0.85-gallon bucket, two fan speeds and no Wi-Fi, advanced-filter option or pump.
Read the assessment ↗
Frigidaire
22-pint/day Frigidaire dehumidifier with Wi-Fi, a three-speed fan, a 1.7-gallon bucket and optional separately sold PureAir filtration; no pump.
Read the assessment ↗
Midea
A 50-pint/day Cube listing with manual-documented fitted-bucket gravity and bucketless-gravity routes. Its full-spec model number conflicts with the exact page identity, and the exact EPA record says Connected Capable: No despite Midea app claims; pump, dimensions, weight and app control are not treated as established.
Read the assessment ↗
Midea
A 50-pint/day EasyDry cabinet with a fitted bucket, wheels and timer. Midea lists no built-in pump and no Smart Control; the manual supports bucket or downhill-gravity use with the tank installed.
Read the assessment ↗
Midea
A 50-pint/day EasyDry dehumidifier with a built-in pump, Smart Control, wheels and a low, broad 11.54-inch-high cabinet. Midea documents bucket, gravity and pump drainage, but does not publish a maximum pump lift for this exact model.
Read the assessment ↗
Hisense
A 25-pint-class, single-speed portable dehumidifier. Hisense describes an internal bucket or a separately supplied garden hose; only the fitted-bucket route is documented as a matcher plan.
Read the assessment ↗
Hisense
A 35-pint-class, three-speed portable dehumidifier. The exact page describes an internal bucket and a separate garden hose; only the bucket route is used as a hard matching plan because the public material does not establish lift or hose-installation limits.
Read the assessment ↗
Hisense
A 35-pint-class portable dehumidifier with a fitted bucket, local humidity settings and low, high or automatic fan choices. The available exact-model manual documents bucket collection, not an upward pump or continuous gravity route.
Read the assessment ↗
Danby
A 22-pint-class Danby portable dehumidifier with temperature-responsive Smart Dehumidify, washable filter, local electronic controls, and fitted-bucket or lower gravity-hose operation. No lift-pump or bucketless arrangement is documented.
Read the assessment ↗
Danby
A compact 22-pint-class Danby portable dehumidifier with Wi-Fi app control and bucket-full alerts, temperature-responsive Smart Dehumidify, and two water routes: a fitted bucket or a short lower gravity hose. No lift pump or bucketless setup is documented.
Read the assessment ↗
Danby
A white 40-pint-class Danby portable dehumidifier with local temperature-responsive Smart Dehumidify, a washable filter, two fan speeds, and fitted-bucket or short lower gravity-hose operation. No lift-pump or bucketless setup is documented.
Read the assessment ↗
Danby
A white 40-pint-class Danby portable dehumidifier with electronic set-point controls, two fan speeds, a washable filter and a fitted bucket. Its exact manual documents a supplied gravity-drain connector and hose; no pump-lift or bucketless setup is documented.
Read the assessment ↗
Danby
A compact white 30-pint-class Danby dehumidifier with local set-point controls, two fan speeds, a washable filter, and fitted-bucket or short gravity-hose operation. Its exact page and manual do not document Smart Dehumidify, Wi-Fi, a lift pump, or bucketless drainage.
Read the assessment ↗
Danby
A white 30-pint-class portable Danby with local temperature-responsive Smart Dehumidify, a washable filter and fitted-bucket or short gravity-hose operation. The bucket must remain installed, the continuous route has no pump, and the hose-end parts are not supplied.
Read the assessment ↗
Danby
Danby’s 50-pint/day white cabinet with local temperature-responsive Smart Dehumidify and an ENERGY STAR claim, but only fitted-bucket and lower-gravity water plans. It has no documented lift pump or phone-control setup.
Read the assessment ↗
Danby
A 50-pint/day Danby with local Smart Dehumidify, a fitted intermediate bucket and a vertical pump. Its manual limits the supplied pump hose to 15 feet total but does not publish a separate vertical-lift figure.
Read the assessment ↗
Danby
A 50-pint/day Danby with Wi-Fi/app bucket-full notices in a low, compact cabinet. Its exact manual supports bucket or downhill gravity drainage, not pump lift or bucketless use.
Read the assessment ↗
Danby
A compact-bodied 50-pint/day Danby that combines Wi-Fi/app notices, local Smart Dehumidify and a vertical pump. Its exact manual caps both pump-hose distance and rise at 16 feet and requires the fitted bucket.
Read the assessment ↗
Danby
Danby’s 60-pint/day, Wi-Fi and pump configuration with a larger 18.78 × 14.17 × 24.61-inch body. It has a fitted-bucket pump route with a 15-foot total-hose limit but no published separate lift height; refrigerant sources conflict.
Read the assessment ↗
LG
A 25-pint-class LG Sonoran smart dehumidifier with bucket or lower gravity drainage; the fitted tank must remain installed for operation.
Read the assessment ↗
LG
A 35-pint-class LG Sonoran smart dehumidifier with Manual, Auto, Continuous and Boost modes and bucket or lower gravity drainage.
Read the assessment ↗
LG
A 50-pint-class LG Sonoran smart dehumidifier listed in black and white finishes, with ThinQ Wi-Fi, EPA ENERGY STAR certification and bucket or lower gravity drainage.
Read the assessment ↗
Hisense
A 50-pint-class Hisense portable dehumidifier with an internal collection bucket, three-speed label, low-speed 46 dB(A) listing and ENERGY STAR certification. Its product page also mentions a side garden-hose connection, but the model-specific installation details needed for an uphill or bucketless plan are not established here.
Read the assessment ↗
AprilAire
A fixed 100-pint/day whole-home unit with ten-inch duct collars, a local digital control and a bucketless gravity-drain plan. The exact manual supports ducted E100 installations; this unlettered model uses leveling feet and its product page says the drain hose is not included.
Read the assessment ↗
AprilAire
The caster-equipped 100-pint/day AprilAire whole-home model. The exact page lists four casters and ten-foot drain tubing, but it remains bucketless and gravity-drained, without a built-in lift pump or verified app control.
Read the assessment ↗
Santa Fe
A low-profile, 55-pound free-standing model rated at 70 pints/day at 80°F/60% RH and 43.7 pints/day at 65°F/60% RH. It has no bucket or built-in lift pump: the exact manual calls for a trapped, continuously descending gravity drain.
Read the assessment ↗
Santa Fe
A 102-pound free-standing cabinet rated at 110 pints/day at 80°F/60% RH and 70 pints/day at 65°F/60% RH, with dual discharge outlets for a designed air-distribution layout. Its internal trap is not a pump; the standard configuration needs gravity drainage to a suitable lower outlet.
Read the assessment ↗
Santa Fe
A 59-pound horizontal stand-alone model whose exact 4044510 page and 2026 sheet report 102 pints/day at 80°F/60% RH and 67 at 65°F/60% RH despite the “105” model name. Its variable-speed blower and positive-pressure gravity drain distinguish it; it has no bucket or built-in lift pump.
Read the assessment ↗
Santa Fe
A heavy vertical, flow-down stand-alone model rated at 116 pints/day at 80°F/60% RH and 76 at 65°F/60% RH. Its 36-inch cabinet is a basement-format choice with an attached six-foot gravity hose; the optional lift-pump kit is separate and the filter specification conflicts between page and manual.
Read the assessment ↗
Santa Fe
A fixed ducted whole-home ventilating dehumidifier with an optional outdoor-air intake, external low-voltage control and gravity-drain installation.
Read the assessment ↗
Santa Fe
Current U.S. fixed whole-home ventilating dehumidifier, part 4046180: Santa Fe rates 205 pints/day at 80°F/60% RH; exact EPA Appendix X1 record is 172.13 pints/day with IEF 3.12 L/kWh.
Read the assessment ↗
Santa Fe
Current 37-pint/day (80°F/60% RH) fixed in-wall dehumidifier with an onboard control and a bucketless gravity-drain plan; not HVAC-ducted or portable.
Read the assessment ↗
Santa Fe
Current 70-pint/day (80°F/60% RH) fixed ducted dehumidifier with optional outdoor air, MERV-13 filter and bucketless gravity-drain plan; no integral pump or collection tank.
Read the assessment ↗
GE Appliances
50-pint-class portable GE dehumidifier with Wi-Fi and a built-in pump. The included pump hose lifts water up to 16 ft vertically, but the bucket must remain installed and the app does not enable pump mode.
Read the assessment ↗
GE Appliances
50-pint-class portable GE dehumidifier with Wi-Fi and no built-in pump. Use the fitted bucket or a separate downhill gravity hose; the exact tank volume remains unknown.
Read the assessment ↗The APER50LZ is a separate 50-pint pump reference: its page-linked manual documents a 16-foot rise, but still requires the 15-pint tank fitted and starts pumping after the tank fills. Its gravity hose is not included, and bucketless running is not documented. Compare the APER50LZ, APEL45LY and Cube water routes before evaluating an installed or used unit.